Bumper Mount with hole

This is part where plungers on the bumpers will go into, locking the bumper into the robot.

We used a #10-32 x 3.25" Socket head bolt (https://andymark.com/products/10-32-x-3-25-in-socket-head-cap-screw-1) going through a 2" MAXTube and a 1/8" bellypan, with a #10-32 nyloc nut (https://www.mcmaster.com/90631A411/) screwed in the top to lock the two mount pieces mount in place to the robot. Bolt lengths vary depending on bellypan and robot frame heights.

STEP (Top section):

40KB

Bumper Mount w-hole Copy 1.step

Open

STL (Top section):

5KB

Bumper Mount w-hole Copy 1.stl

Open

STEP (Bottom section):

24KB

Bumper Mount w-hole (1).step

Open